- Tắt/bật 2 nhóm đèn huỳnh quang theo sự hiện diện và độ sáng (tự nhiên).
- Gắn trần chìm trong nhà (IP40), tầm quét 8x8m/11x11m (ngồi/đi).
- Kênh 1: xung (0,5s), 10s -20 min (tắt trễ).
- Kênh 2: 10s~120min/0s~10min (tắt/bật trễ).
- Tự điều chỉnh. Nối với cảm biến hoặc công tắc ngoài để điều khiển thủ công.
- Hoạt động song song.
- Chế độ tự động và bán tự động.
- Hạn dòng đối với chấn lưu.
- Chế độ phòng/hành lang
Features- Presence detector (PIR)
- Square detection area
- Genuine daylight measurement
- Two light switch outputs (relay, 230 V)
- Automatic control of two lighting zones
- Lighting control with two light threshold values and self-learning switch-off delay
- Choice of fully or semi automatic operation
- Sensor or switch options for manual switching
- Inrush current limitation for EB
- Fully or semi-automatic: In 'Fully automatic' mode, the lighting switches on and off automatically according to presence and light. In 'Semi-automatic' mode, it must be switched on manually and it switches off automatically
- Manual override: The lighting can be manually switched on or off at any time via sensors or switches
- The inrush current limitation makes the presence detector particularly suitable for switching electronic ballasts (EBs)
- The presence detector has double 'Genuine daylight measurement' and is only suitable for switching fluorescent lamps (FL/PL)
- Parallel switching: Up to ten detectors can be connected with each other to extend the detection area. They continue to switch two lighting groups. Presence is detected by all the detectors
- Device can be connected as master or slave
- Test operation mode checks the detection area and installation
- The parameters can either be set using the potentiometer or via the optional service remote control QuickSet plus
- A maximum of 10 detectors can be switched at the same time
- The switching behaviour of the presence detector is controlled by presence and light
- The self-learning switch-off delay adjusts to occupants' behaviour
- The square detection area allows accurate and simple planning
Specifications| Operating voltage | 230 V AC |
| Frequency | 50 Hz |
| Recommended installation height | 2 – 3,5 m |
| Installation type | Ceiling installation |
| Power consumption | 0,9 W |
| Light measurement | Genuine daylight measurement |
| Setting range brightness | 10 – 1500 lx |
| Light switch-off delay | Impuls (0,5 s), 10 s-20 min |
| Type of contact light | Relay 230 V, switch-on current limit |
| Lamps | Fluorescent lamps |
| Compact and flourescent lamps | max. 1400 VA |
| Compact and flourescent lamps (Number of electronic ballasts) | 16 x (1 x 58 W), 8 x ( 2 x 58 W), 24 x (1 x 36 W), 12 x (2 x 36 W), 24 x (smaller than 36 W) |
| Type of connection | Spring terminals |
| Max. cable cross section | 1,5 mm² |
| Mounting plate | 70 x 70 mm |
| Size of concealed housing | 55 mm (NIS, PMI) |
| Ambient temperature | +0 °C … +50 °C |
| Protection class | II as per EN 60 730-1 |
| Type of protection | IP 40 |
-
Hãng sản xuất THEBEN của Đức.-
Bảo hành: 12 tháng.